Description
A GI elbow 45 degree turns a threaded pipe through 45 degrees. It is a galvanised malleable iron fitting with a female thread at each end. As a result, it gives a gentle turn with less pressure loss than a 90° elbow. We stock 45° GI elbows at our showroom in Nad Al Hamar, Dubai.
First, choose the size to match your pipe, for example 1″. Next, wrap the threads with PTFE tape or use a thread sealant. Because the zinc coating resists rust, the elbow also suits outdoor and wet areas. In addition, we stock 90° GI elbows for sharper turns.
Why Choose Our GI Elbow 45 Degree
- Gentle turn: A 45° bend keeps flow smooth and pressure loss low.
- Rust resistant: Hot-dip galvanising protects against water and humidity.
- Tight seal: Taper BSP threads seal well with tape or paste.
- Matches our range: In addition, it fits our GI nipples, unions and tees.
GI Elbow 45 Degree: Sizes and Standards
| Parameter | Specification |
|---|---|
| Material | Malleable cast iron, hot-dip galvanised |
| Standard | BS EN 10242 (formerly BS 143 / BS 1256) |
| Threads | Female BSP to ISO 7-1 / BS 21; NPT on request |
| Sizes | 1/2″ to 4″ |
| Type | Female x female; male x female (street) on request |
Where They Are Used
- Water supply: for example, offsets around beams.
- Fire lines: for instance, sprinkler and hose reel pipes.
- Irrigation: such as valve and filter sets.
- Building services: in particular, plant room pipework.
Order from Our Dubai Showroom
Firstly, visit Showroom No. 14, Nad Al Hamar, Dubai to collect from the counter. Alternatively, send your list to +971 4 285 1521 or on WhatsApp at +971 50 486 7233 for a same-day quote. You can also see the GI equal tee, all our GI fittings or read about galvanising.
Reviews
There are no reviews yet.